Home > Knowledge > Content

Categories

Digital Viscometer Installation

- Apr 28, 2018 -

1. Remove the chassis, lifting column and handle from the packing box. Screw the lifting column into the chassis so that the lifting column threads are aligned with the front, and then tighten the hex nut at the bottom of the lifting column. Mount the lifting block on the lifting column and adjust the lifting and looseness.

The

2. Screw the handle on the lifting block, then install the instrument main box and connect the temperature probe (if optional).

The

3. Adjust the three screws on the chassis so that the instrument is level (see bubble at the top of the main chassis).

The

4. Remove the universal joint protection cap at the bottom of the main box.

The

5. Connect the power cable.


Related Industry Knowledge

Related Products

  • Bench Top Grain Whiteness Meter
  • Portable Gloss Checker
  • Thermostat Water Bath Instrument Digital with Large Capacity of 22 L Used for Chemistry
  • Magnetic Hotplate Stirrer Small Type Capacity of 5 L
  • Pocket Pen Conductivity Meter Electrical for Water Testing and Aquarium
  • Analytical Balances Weighing Scale Digital Precision Scientific Table Type 0.1 mg with RS232 for Laboratory