Halogen Moisture Detector
1. Halogen Moisture Detector Overview
The halogen lamp grain moisture meter is to test grain seeds moisture content with halogen lamp heating, normally, it need 5-30mins preheating time , and the time depends on the whether , if in the cold whether, the time will be onger, if in the warm whether, the time will be short, even no need for pre heating than users can start to use . This moisture meter with a heating range of RT to 160℃. Users can choose to set the heating temperature according to what sample you are going to test.
There are many kinds of grain and powder can be test by this type of moisture tester, about 20 kinds , such as the tea, food, wood，feed, and so on.
2. Water Moisture Meter Product Information
3. Moisture Meter Readings Real Shot
4. Moisture Checker Application Scope
5. Grain Moisture Tester Bright Spot
Test grain seeds moisture content with halogen lamp heating
10-30mins preheating time;
RT-160℃ heating range.
20kinds of Grain seeds can be tested.
The measuring range is 0-100%
Provided 100g poise for calibration
Less than 10 second for one sample.
With some build-in testing mode
6. The Total Sets of Halogen Moisture Analyzer Include :
7. Sending the Goods by a Variety of Channels
By sea, by air, by air-express, by truck, by train, by EMS, bY China post
8. Our Quality Service for the Halogen Lamps Grain Moisture Meter
Normally all MesuLab products are supplied with a warranty of 12 Months from the date of shipment. This warranty is entirely dependent on the following conditions:
1.The following circumstance don't belong to the warranty policy which is Man-made damages caused by improper operations.
2.The instruments must be operated in accordance with our operating guidelines; serviced and maintained on a reg-ular basis in accordance with the terms specified in the relevant user manual.
3. Only approved spare parts should be used in the instruments which bought from MesuLab and these should be changed on a regular basis as specified in the relevant user manual. Details of the approved spare parts and accessories for eaCh instrument are shown in the user manual or alternatively this information can be obtained from MesuLab.