Categories

Basic Methods Of Using Spectrophotometer

- Jul 19, 2017 -

1, press "Go toλ" key, enter set wavelength;

2, four colorimetric dishes, where the R position of the reference sample, the remaining three into the test sample. Placing the colorimetric dish in a colorimetric tray in the sample pool and covering the sample pool cover;

3, the reference sample is pushed into the optical path, according to the "abs%" key, so that the instrument automatically 0 and full degree;

4. Then the test sample is pushed into the light path to show the absorbance value of the sample;

5, if you want to test the kind of data to print out, just press "Start/stop" key can.


Related News

Related Products

  • Digital Single Beam VIS Spectrophotometer LED Display with 4 nm Bandwidth and USB Interface
  • Hand Centrifuge Centrifusion Machine Manual and Simple Operate for General Purpose
  • Analytical Balance Scale Bench Top Digital LCD Display High Precision and Stability 0.01 g for LAB and Chemistry
  • Hand Held Refractometer Wine and OE for Fruit Juice Brewery and Farming
  • LCD Display Flame Spectrometer with 5 Elements and with PC Software or Micro Printer
  • VIS Spectrometer with 6 nm Band Width 350 nm to 1000 nm Wavelength Range and LED Digital Display